A new ROC? Yes. A great thing just got way better. Here's the info...


When I first introduced the original LS ROC back in 2009, it was a pedal that could combine the sounds of modern heavy distortion with the tonal transparency of a good tube amp.
After stepping back and looking over the ROC again, I came up with two other requirements. First, I wanted to incorporate into the ROC the ability to go from a mild boost, to an overdrive, and then onto heavy distortion, without changing the overall character of my amp's inherent tone. Basically, I wanted this pedal to be able to offer 'soft bluesy overdrive', AND 'hard compressed distortion' with everything in-between. Second, it needed to be smaller and cheeper.

Introducing, the new LS ROC. This is a truly transparent pedal that is effectively like adding a second channel to any amp. By having a pre-distortion Bass control and post-distortion treble Cut control, the mid hump EQ found in most OD/Distortion pedals can be eliminated if desired. This also means that when you step on the ROC your guitar and amp's unique tone will still be what you hear. The ROC is one of the absolute best clean boost and/or distortion pedals ever designed.

The first thing you will notice about the ROC is the range of drive you will get from the Drive knob. Crank it hard left and you will get an amazingly transparent clean boost pedal. Turn the Drive to around 12 o'clock and the ROC becomes a warm tube-like gritty overdrive pedal with an ultra touch-sensitive response. Crank the gain hard right and the ROC turns into a fire-breathing, face-pummeling, everything-on-10 wall of distortion. Modern heavy rock at it's best.

In a nutshell the LS ROC is an extremely versatile pedal that shows off your guitar and amp's unique tone, instead of covering it up. Extreme modern heavy distortion, smooth bluesy overdrive, or transparent clean boost. Try one and you’ll find out why it’s the one pedal you’ll never want to play without.

 
 
Introducing the LS 8-oh-8 Deluxe. Building upon the popularity of the LS 8-oh-8, the Deluxe model adds a 'voice' switch into the mix to give the 8-oh-8 a whole new palette of sounds. Sometimes referred to as a 'fat' mod, the voice switch changes the EQ of the 8-oh-8 from the 'classic' mid hump EQ, to a somewhat flatter, more bottom end EQ. This is great for getting an extra thick overdrive tone suitable for drop tunings, thick chugging chords and even bass. 

The 'standard' 8-oh-8 has also been updated with new graphics. Don't worry however, the guts of this classic is still the same circuit that made the 8-oh-8 so popular!

 
 
Always looking for ways to save room on my pedal board, I realized that I love the tone of my ROC distortion pedal, but I wish it took up less space. So began the quest for a single channel ROC. I ended up stripping away the 'boost' channel, shrinking it down, and changing the EQ part of the circuit. The new EQ controls give you a high cut and two distinct voices. The 'Brown Note' distortion pedal was born. This is still the fire-breathing, face-pummeling, everything-on-10 wall of distortion pedal that made the ROC so awesome, just in a smaller package. If you have the space, and need the flexibility of an extra channel and two knob tone shaping, get the ROC. If however, you're like me and pedal board space is at a premium, the ROC's little brother, the 'Brown Note', will deliver that modern heavy rock n' roll tone that made the ROC famous.
Picture
 
 
I have had several questions from customers wondering where I get my super heavy duty pedal enclosures from. The simple answer is, I build them myself. :-) Most pedal manufactures use off-the-shelf, die cast aluminum boxes. I prefer to use something a little more heavy duty. After all, you are stomping on this thing so it should be built to take a life time of abuse!

Picture
The enclosures start life as flat, cut-to-size, 16 guage steel blanks.
Picture
From there all the holes are laid out and punched and cleaned up (all the metal burrs removed etc...).
Picture
Then the enclosures are bent, and screw holes are drilled and tapped. Done! After that it's on to painting and graphics but that's for another post. ;-)

That's all there is to it. Super heavy duty enclosures that will keep the components and circuits safe from the abuse that we put these pedals through.
 
 
Well, the king of pedal reviews, Gearmanndude himself, has gotten a hold of the LS MammaJamma. Here is his video review...
 
 
Finally, I have some demo videos of my pedals. You can see them at www.youtube.com/lseffectsEnjoy!!
 
 
Introducing my latest creation, the LS MammaJamma OD/Boost/Distortion pedal. The Mammajamma's tone control makes it one of the most flexible pedals ever created. The MammaJamma has a 2 knob eq stage. This is not your typical treble/bass tone control but a unique eq where both knobs interact with each other. You want a 'tubescreamer like' tone with a strong mid hump? No problem. How about a scooped, thick, British stack tone? Done. Completely flat? pronounced highs? Thumping bass? With the 'tone' and 'timber' eq controls on the MammaJamma you can nail them all. Combine this unique eq stage with a three way switch to select either vintage, clean, or modern clipping sounds and you have a pedal that allows you to tune it to your needs and cover almost any sound you want. The MammaJamma can go from a classic, harmonically rich overdrive tone, to a compressed, super saturated modern distortion sound, to an ultra clean booster or even a gritty treble booster. One pedal, almost unlimited tonal possibilities. This is the MammaJamma of all pedals!
Picture
 
 
The LS 'Tone Messiah'. An ultra transparent, Class-A circuit, line buffer pedal. No cheap IC chips here! 

Most pedal manufacturers employ pre-packaged ICs (integrated circuit chips) to buffer their signals. These class-B chips are designed to be extremely efficient, quiet, and very compact making them perfect for electronics that employ batteries that would otherwise quickly run dead. These chips are also really cheap! This reduces manufacturing costs and best of all, because they are really easy to use and come with great application manuals from the same guys that make cell phones, anyone with basic electronic knowledge can use them.

Only one problem. . . they sound bad.

Why? Well--guitars are not buffered sources like iPod. Guitars are musical instruments. They breathe and spit and bark and cry. They are alive. As soon as you connect a pre-packaged frozen dinner in between the pickup and the amp, the instrument becomes detached. It just is not the same. It is the way that the guitar reacts to the circuit that completes the instrument.


For a buffer to work, you have to treat the guitar as if it is seeing the world's best guitar amplifier. The LS 'Tone Messiah' does just that.  It uses a unique class A circuit that has been optimized for guitar.
Picture
 
 
Things keep evolving here at LS Effects. Just as we shrank the 8oh8 a few months ago, now we are shrinking the Tide tremolo. Don't worry, nothing has changed circuit or tone wise. This is still the same sweet, vintage tremolo that the Tide is famous for. Everything is just being housed in a smaller more pedalboard friendly box. The old Tide measured 4 3/8 x 3 1/2. The new one measures 4 3/8 X 2 5/8. It might be a smaller box, but it's still the same sweet pulsing tone.
Picture
The New Smaller Tide Tremolo.
Picture
 
 
Building upon the success of the LS 8-oh-8 I am very happy to announce the 8-oh-8 vr. 2. Don't worry, nothing has changed circuit or tone wise. This is still the killer Overdrive that everyone is raving about. Everything is just being housed in a smaller more pedalboard friendly box. The old 8-oh-8 measured 4 3/8 x 3 1/2. The new one measures 4 3/8 X 2 5/8. Boom! Smaller box, same BIG tone.